Sản phẩm giá tốt 2 08/09/26

Sản phẩm giá tốt 2 08/09/26 Tổng hợp tất cả các sản phẩm hiện đang sẵn khi và giao ngay.

Sản phẩm giá tốt 2 18/08/26:

list#2

 

 1 100% Italy Origin

Senseca Vietnam / Delta Ohm Vietnam / GHM Vietnam
Senseca-Vietnam / Delta-Ohm-Vietnam / GHM-Vietnam

SensecaVietnam / DeltaOhm-Vietnam / GHMvietnam

Code: HDP356A02

ICP tri-axial accelerometer for the measurement of the vibrations transmitted to the hand-arm system

Includes:

• 081B05 10-32 UNF copper-beryllium alloy mounting screw

• M081B05 M6 copper-beryllium alloy mounting screw

• ACS-1T Manufacturer’s calibration card

 

2 100% Italy Origin

Senseca  

(Delta Ohm/ GHM) Vietnam

Code: HD2030AC1

Cube-shaped adapter

Includes:

• 10-32 UNF cylindrical head with hex socket screw with 4 mm hex key

• 5-40 UNC cylindrical head with hex socket screw with 4 mm hex key

• 10 cable-ties, width 4.5 mm, length 200 mm

• 1 metallic clamp, width 9 mm

 

3 100% Italy Origin

Senseca  

(Delta Ohm/ GHM) Vietnam

Code: HD2030AC2

Adapter for the mounting of the accelerometers

Includes:

• 10-32 UNF cylindrical head with hex socket screw with 4 mm hex key

• 5-40 UNC cylindrical head with hex socket screw with 4 mm hex key

• 10 cable-ties, width 4.5 mm, length 200 mm

• HD2030FV: 2 velcro straps, width 25 mm, length 300 mm

 

4 100% Italy Origin

Senseca  

(Delta Ohm/ GHM) Vietnam

Code: HD2030.CAB3-3M

Cable for the connection of tri-axial accelerometers – 3 meters

 

5 100% Italy Origin

Senseca  

(Delta Ohm/ GHM) Vietnam

Code: HD2030.124

Adapters kit for the measurement of the vibrations transmitted to the hand-arm system.

Includes:

• HD2030AC1 – HD2030AC2 – HD2030AC4

 

6 100% Italy Origin

Senseca  

(Delta Ohm/ GHM) Vietnam

Code: HD2030MSP

IEPE tri-axial accelerometer with seat adapter for the measurement of vibration transmitted to whole

body. Complete with seat pad HD2030PAD.

Includes:

• HD2030PAD rubber seat adapter conforming to standard UNI EN 30326-1

• Mounting Kit for HD2030PAD and HD2030AC5

• Mounting screw 10-32 UNF copper-beryllium alloy (HD6200)

• Calibration chart

 

7 100% Italy Origin

Senseca  

(Delta Ohm/ GHM) Vietnam

Code: HD2030.CAB3M-2M

Cable for connection of tri-axial accelerometers with 4pin M5 connector – 2 meters

 

 jprob 1 100% European Community/European Union Origin

WEMOTEC VIETNAM – WEMOTEC-VIETNAM – WEMOTECVIETNAM – WEMOTEC- VIET-NAM 

WEMOTEC Expander Roller 125 mm

Roller with rubber profile slats and adjustment gearbox system – Roller & fullset kit *NO possible to purchase the roller separately, only as complete assembly  
drawing-no: Web Width AB = 1.800 mm Measure L = 2.100 mm Shaft extention: 148 mm x 20 mm diameter Spread Effekt: 0-50 mm Web Tension: max. 5 – 445 N Web Speed: max. 120 m/min.

Temp: 60° C max

WEMOTEC Types of Rollers WEMOTEC 

WEMOTEC Aluminum web guide rollers

WEMOTEC Transport rollers

WEMOTEC Hardened welding rollers

WEMOTEC Cutting rollers and -axles

WEMOTEC Rubber rollers

WEMOTEC Tooth rollers

WEMOTEC Heating- and cooling rollers

WEMOTEC Driving rollers

WEMOTEC-Vietnam, We can do Customized rollers and special formats for customers’ demands

 

 jprob 1 100% United Kingdom / USA Origin

Vortexglobal Vietnam

Model:  Vortex SFA800V1-HT3-HS-SB-AX-CE3496 Pneumatic Gate Valve – Air Cylinder Slide Gate Valve – Vortexglobal – Double Acting Air-Cylinder Actuator 

Vortex Model No. Vortexglobal SFA800V1-HT3-HS-SB-AX-CE3496, 800mm Salina Roller Gate Valve. Valve body and blade are 304 stainless steel. Material contact is 304 stainless steel and polymer. Milled access slots in side frame allows removal and replacement of bonnet seals while the gate valve remains in service. Valve body is modified to accept proximity switches (plugged if indication switches are not utilized).

• Oversized double acting air cylinder actuator equipped with a magno-piston for use with magnetic reed position indication switches.

• (HT3) – Valve is rated for 250˚F (122˚C) maximum continuous service. PET side seals and upper and lower bonnet seals are live loaded and Buna N rubber backed. Valve also includes cam-adjustable slide rollers and PET roller spacers. End seal and bonnet blade guides are PET.

• (HS) – Hardened steel rollers with an external grease zerk replace polymer camadjustable slide rollers

• (SB) – Standard bonnet covers are replaced with solid covers gasketed with SBR foam (silicone sponge when used in conjunction with HT4 modification). A 1/4″ NPT purge tap is added to upper bonnet cover for use in conjunction with an air purge assembly (sold separately).

• (AX) – Valve is approved for Ex II 1/2 D Ex h IIIC T100°C Da/Db Tamb -29°C to +60°C (Only internal area of the valve is rated to Category 1). Valve includes grounding lug, ATEX approved actuator, ATEX IOM and tag with certificate number. (All actuator, switch, and air control solenoid accessory options must also be ATEX approved)

• (CE3496) – WITH BUNA N RUBBER TO REPLACE SILICONE RUBBER BUNA N RUBBER (SB) GASKETS, NO SILICONE OR NATURAL RUBBER. REF. SFA25-MG-HT3-HS-SB-RSE16139 USING TWIN 6” AIR CYLINDERS.

 

TuyChon

1.1 100% United Kingdom / USA

Origin

Vortexglobal 

Vietnam

Model: HISS-32

32″ Special Service Inlet, 304 stainless steel construction, eliminates material packing and reduces wear on seals; should be used when closing on abrasive, potentially sticky, pelletized, or granular materials, (adds 3/16″ to OAH of valve).

NOTE: RECOMMENDED WHEN VALVE IS INSTALLED IN HORIZONTAL PLANE. NOT RECOMMENDED WHEN VALVE IS TO BE INSTALLED VERTICALLY

 

TuyChon

1.2 100% United Kingdom / USA Origin

Vortexglobal Vietnam

Model: 4F500-24EX2-24VDC-CE3496

Air Control Assembly, double solenoid, 24v DC ATEX II 2 GD c T4 T130 °C Certified solenoid G 1/2 ports, flow rate 4500 l/min, includes Polyurethane tubing, fittings and mounting brackets.

(CE3496) SETUP FOR TWO AIR CYLINDERS

 

TuyChon

1.3 100% United Kingdom / USA Origin

Vortexglobal Vietnam

Model: 4T9P-SPST-HL

ATEX Magnetic reed switch, using ATEX II 1G EEx ia IIC T5/ II 1D T95 °C IP67, (max. Ui = 15V, Ii = 60 mA, Pi = 100mW) Certified Magnetic Reed Switch, 2-wire Namur, approval according to KEMA 01 ATEX 1264X, Yellow LED indication light, Nominal voltage 8.2 VDC, Internal inductance 30 nF / Capacitance µH.

 

<3 jprob 1 100% Taiwan Origin

Vecow Vietnam

New model.: UE-1008 I/O Interface Communication Converter

PCI Express 8-port USB Expansion Card, PCI Express x4, 4 Independent USB 3.0

MS-ultrasonic Technology Vietnam  
Model: MS sonxGEN 4.0 ADV 35-40/1000 NPN-C Ultrasonic Generator 

Digital Ultrasonic Generator 35 / 40 kHz

– mounted in the electrical cabinet

– peak power 1000 W

specification and main features:

– digital frequency generation and control

– control of a constant amplitude, e.g. in case of load fluctuations

– automatic determination of start frequency and control factors

– high efficiency and low heat generation

– shutdown options time, energy, power and external stop

– temperature compensation for tracking the start sequence during heating

– amplitude adjustable between 70 – 100 % Interfaces:

– LAN service interface

– digital I/Os

– PROFINET

mains voltage (DE): 230 V~ (+10/-14 %) 50/60 Hz

   2. MS-ultrasonic Technology Vietnam  
Model: MS sonxCON 35/1000 IP50 AL S Converter 

Converter 35 kHz 1000 W

– with retaining strap

– output amplitude: 7,0 ± 0,4 µm

– protection class: IP 50

– housing material: Aluminium

– hf-lock: Push-Pull

– coupling thread: M10 x 1,25

 
ms-ultrasonic Industries

Automotive

Packaging Industry and Food

Textile Industry

Medical Technology

Consumer Goods

Electrical components

ms-ultrasonic Competences

Ultrasonic welding

Plastic welding

Metal welding

Application technology

Customer-oriented workflow

ms-ultrasonic Products

MS sonxMAC ultrasonic custom machines

MS sonxTOP ultrasonic series machines

MS sonxSYS SEAL ultrasonic systems for packaging

MS sonxSYS COMBINE ultrasonic systems for nonwovens

MS sonxCOM ultrasonic components

 

<3 jpro200 1 100% Taiwan Origin

MOXA Vietnam

MOXA CP-118U Interface-Connection-Converter – MOXA 

MOXA 8 Port UPCI Board, RS-232/422/485

 

2 100% Taiwan Origin

MOXA Vietnam

MOXA OPT8-M9 Interface-Converter – MOXA 

MOXA 8 Port Connection Box, DB9M, Matel Case
Industrial Network Infrastructure

 

 jpro4 1 100% UK/Spain Origin

Thame Side Vietnam

Item : VC3500-75T-NOV-ATEX LoadCell

VC3500 Stainless Steel Double Ended Shear Beam 75t capacity.

 

 jpro39 1 100% Canada Origin

GREYSTONE Vietnam

Model: DSD2G Carbon-Monoxide-Detector 

Wall/Surface Mount Carbon Monoxide Detector, No Relay, 0-10Vdc out put

 

1 100% Taiwan Origin

MOXA Vietnam

MOXA CP-118U Interface-Connection-Converter – MOXA 

MOXA 8 Port UPCI Board, RS-232/422/485

2 100% Taiwan Origin

MOXA Vietnam

MOXA OPT8-M9 Interface-Converter – MOXA 

MOXA 8 Port Connection Box, DB9M, Matel Case

 jpro20 1 100% EU Origin

Burkert Vietnam

Burkert 560205 multiCELL Multichannel/Multifunction Transmitter  
Burkert Controller – a process controller, 560205 is the article number for a Bürkert Type 8619 multiCELL Multichannel/Multifunction Transmitter/Controller – Burkert

Xem thêm các sản phẩm Bơm Tại đây

Xem thêm các sản phẩm Quạt Tại đây

Xem thêm các sản phẩm Bộ làm mát Tại đây

Xem thêm các sản phẩm HVAC/ Phòng sạch Tại đây

Xem thêm các sản phẩm Máy sấy Tại đây

Và cũng như các sản phẩm Khác Tại đây

Hãy liên hệ ngay với PumpFanBlow để nhận được sự tư vấn và hỗ trợ tốt nhất.
Địa chỉ: Số 4 Đường 14, Quốc Lộ 13, Khu Đô Thị Vạn Phúc , Phường Hiệp Bình Phước, Thành phố Thủ Đức, Thành phố Hồ Chí Minh, Việt Nam
Điện thoại: 0394737110
Email: Sale2@pumpfanblow.com