Listcode Magtrol Vietnam 2 030826

Listcode Magtrol Vietnam 2 030826 Tổng hợp tất cả các sản phẩm hiện đang sẵn khi và giao ngay.

Listcode Magtrol Vietnam 2 030826:

Magtrol Vietnam – Magtrol Viet Nam – Magtrol-Viet-nam – DYNAMOMETER MAGTROL Việt Nam – TEST SYSTEM MagtrolVietnam

 

LIST CODE 2

 

1. P/N: 007297  Magtrol

Model: AHB-3.3 Magtrol

BRAKE, AIR COOLED, 24V

Rated torque 3.3 Nm

Max braking power 2,000 W

Max speed 25,000 rpm

24 Volt Coil

This unit requires 620 KPa (90 psi) @ 20 SCFM for proper cooling

 

2. Model:  004661  Magtrol

Item: HB-450-1 Magtrol

Hysteresis brake HB-450-1 Min. torque at rated current

450Oz.in Max. speed 8’000min-1 Power ratings continuous

160W Power ratings intermittent 670W Power supply

93.6VDC

 

3. Model: 311-101-051-101 Magtrol

CALIBRATION ARM

Calibration arm for WB/PB 43  (need 2 per dyno!)

 

4. Model: 312-101-000-051 

Item: 1WB65

Eddy currrent dynamometer

including speed probe OS 123

Rated torque   10Nm at  5730min-1

Maximum braking power   6kW

Maximum speed 30000min-1

 

5. Model: 234-411-000-111 Magtrol

Item: DES 411/111  Kit for Dyno 65, 115 & 1WB15

Kit dynamometer excitation supply for series 65, 115 and 15 dynamometer, in aluminium housing, with 5m cable between DES411 and DSP6001/7000 and 1.5m cable between DES411 and dyno

 

6. Model: 234-401-000-222 Magtrol

Item: TSC 401/222  FOR DYNO 65, 115 & 15

Torque-Speed Conditioner for 65, 115 and 15 series

dynamometers suitable for DSP6001/7000 with 2x 1.5m

cables between TSC401 and dynamometer

 

7. Model: 88M372-0500 Magtrol

Item: TORQUE-SPEED CABLE 14M/15F  (DSP TO TSC/DYNO)  5m

Torque/speed cable 14-pin male – 15-pin female for

dynamometers / TSC with DSP6001 / 700x electronic, length 5m

 

8. SPECIALITEM

Item CW-ENR.004 FOR 1WB65 Magtrol

Chiller water cooling system

Cooling power 6.9kW

Pump pressure 2.7bar

Water flow rate 17l/min

Plastic water tank 25liters

Dimensions L=600 W=725 H=1060mm

Power supply 230VAC 50Hz

Electrical power consumption 2.1kW

Noise level at 10m 51.6dB (A)

With IN / OUT external stop valves and connections

With control valve and manometer

With air flush inlet

Electrical connector and water hoses not included

 

9. Model: 422-214-000-013 Magtrol

Item: LE 214/013  50kN Magtrol

Strain gauge load measuring pin, execution

with integrated 2-wire signal amplifier

(4-20mA). Nominal load 50kN, axial connector

 

10. Model: 422-218-000-013 Magtrol

Item: LE 218/013  500kN Magtrol

Strain gauge load measuring pin, execution

with integrated 2-wire signal amplifier

(4-20mA). Nominal load 500kN, axial connector

 

11. Model: 122-216/011/004 Magtrol

Item: LB 216-011/004  100kN, 20m Magtrol

Strain gauge load measuring pin in standard version.

Nominal load 100kN integral cable 20m, PG radial

 

12. Model: 311-201-000-051 Magtrol

Item: 2WB43 Magtrol

Eddy currrent dynamometer including speed probe OS 123

Rated torque 3 Nm at 9550min-1 Maximum braking power 3

kW Maximum speed 50000min-1

 

13. Model: 234-410-000-111 Magtrol

Item: DES 410/111  KIT FOR DYNO 2.7 & 43 Magtrol

Kit dynamometer excitation supply for series 2.7 and 43

dynamometer, in aluminium housing, with 5m cable between

DES410 and DSP6001/7000 and 1.5m cable between

DES410 and dyno

 

14. Model: 234-401-000-212 Magtrol

Item: TSC 401/212 FOR DYNO 2.7 & 43 Magtrol

Torque-Speed Conditioner for 2.7 and 43 series

dynamometers suitable for DSP6001/7000

With 2x 1.5m cables between TSC401 and dynamometer

 

15. Model: 88M372-0500 Magtrol

Item: TORQUE-SPEED CABLE 14M/15F  (DSP TO TSC/DYNO)  5m Magtrol

Torque/speed cable 14-pin male – 15-pin female for

dynamometers / TSC with DSP6001 / 700x electronic, length 5m

 

16. Model: 955-01-01-0618 

Item: CW-ENR.002 FOR 2WB43 Magtrol

Chiller water cooling system

Cooling power 3.1kW

Pump pressure 2.7bar

Water flow rate 7.6l/min

Water tank 10 l

Dimensions L=445 W=440 H=806mm

Power supply 1~ 230VAC 50Hz

Electrical power consumption 1.4kW

Noise level at 10m 50.0dB (A)

With IN / OUT external stop valves and connections

With control valve and manometer

With air flush inlet

Electrical connector and water hoses not included

 

17. Model: 73M044 Magtrol

Item: USB-GPIB-HS+ CARD+2m CABLE  W7-SP1 / W10 Magtrol

GPIB-USB-HS card included 2m cable compatible Windows 7SP1/10

 

18. Model: 88M047 Magtrol

Item: GPIB CABLE X2   1m Magtrol

GPIB Cable, length 1m

 

19. Model: 850-016-000-141 Magtrol

Item: DYNO TABLE TAB-43/65/115 RACK 19″ Magtrol

Mobiel table with 19″ rack mount option Base plate 980 x

430 x 50 mm (L x W x H) With 3 T-nut grooves, size 12H8,

gap 125 mm Aluminium frame with wheels Incl. fixing plate

for DES and TSC Dimension 1041 x 503 x 812 mm (L x W x

H) According to drawing 850-016-000V141

 

20. Model: 204216 Magtrol

Item: FIXTURE ONLY AMF-2 Magtrol

Fixture only AMF-2 for motor max. Ø 150mm used with

dynamometer series HD-700

 

21. Model: 88M368-0150 – CABLE, D-SUB 15M/D-SUB 15F, 1.5m, SHIELDED  Magtrol

SIGNAL

CABLE, D-SUB 15M TO D-SUB 15F LONG L/T

 

22. Model: 007726 – HD-810-5C2-0100  Magtrol

DYNAMOMETER, 240 VAC, 60 PPR, SHORT

Rated torque 14.0 Nm (0-5 Vdc output)

New connectors

Short Base Plate

Max braking power 3,500 W

Max speed 12,000 rpm

Blower Cooled

Encoder 60 PPR

 

23. Model: 007941 – DSP7011  Magtrol

CONTROLLER, 1-CHANNEL (GPIB, USB, 1 I/O)

High-Speed Programmable Dynamometer

Controller, Single Channel, USB Interface,

GPIB Interface, Single I/O Card

Xem thêm các sản phẩm Bơm Tại đây

Xem thêm các sản phẩm Quạt Tại đây

Xem thêm các sản phẩm Bộ làm mát Tại đây

Xem thêm các sản phẩm HVAC/ Phòng sạch Tại đây

Xem thêm các sản phẩm Máy sấy Tại đây

Và cũng như các sản phẩm Khác Tại đây

Hãy liên hệ ngay với PumpFanBlow để nhận được sự tư vấn và hỗ trợ tốt nhất.
Địa chỉ: Số 4 Đường 14, Quốc Lộ 13, Khu Đô Thị Vạn Phúc , Phường Hiệp Bình Phước, Thành phố Thủ Đức, Thành phố Hồ Chí Minh, Việt Nam
Điện thoại: 0394737110
Email: Sale2@pumpfanblow.com